The AX-ARTNET-4PORT-WS2811 is a 4-port 700W ArtNet LED controller for WS2811, SK6812 and UCS1903 pixel runs. Aluminium housing with 8A output per port for demanding stage and architectural installations.
Four output ports share a 700 W maximum load, with 8 A available per port — enough current for long, demanding pixel runs without starving the far end of the run. It supports WS2811, SK6812 and UCS1903 pixel protocols over SPI, which covers our AX-2626 pixel bars, digital tubes, pixel strips and point lights, and it also speaks ArtNet and DMX512, so it works with lighting consoles, media servers and PC software. The aluminium housing sheds heat and stands up to life inside a control cabinet or equipment room.
Typical uses are stages, clubs, bars and architectural facades where the controller sits in a cabinet driving several long runs at once. The per-port 8 A output and aluminium housing suit installations that run hard every night. For larger venues, use several controllers on the same Art-Net network, each handling its own section. One-piece samples are available, with a 7–15 day lead time and a 2-year warranty; contact us for the datasheet and for help sizing ports and power to your project.
Installation is straightforward: mount the controller in a cabinet or equipment room, wire the four pixel runs to the four ports, connect the Art-Net source, and map the runs in your console or software. With 8 A per port, keep the total load within the 700 W maximum across all four ports.
Specifications
| Model | AX-ARTNET-4PORT-WS2811 |
| Ports | 4 |
| Max load | 700W |
| Protocols | WS2811, SK6812, UCS1903, SPI, ArtNet, DMX512 |
| Output | 8A |
| Housing | Aluminium |
| Application | Stage, architectural lighting |
| Warranty | 2 years |
MOQ 1 pc sample available · Lead time 7–15 days · 2-year warranty
