The AX-ARTNET-4PORT-700W is a 700W 4-port ArtNet SPI LED controller supporting WS2811, SK6812 and UCS1903 pixel protocols. Four ports with a 700W max load drive long pixel runs for stage and architectural projects.
Four output ports share a 700 W maximum load, so the controller can drive long pixel runs without a separate power setup for every section — wire the runs to the four ports, connect Art-Net, and the whole installation is ready to map. It supports WS2811, SK6812 and UCS1903 pixel protocols over SPI, which covers our AX-2626 pixel bars, digital tubes, pixel strips and point lights, and it also speaks ArtNet and DMX512, so it works with lighting consoles, media servers and PC software.
Typical uses are stages, clubs, bars and architectural facades where a single controller must carry several long runs at once. The 700 W load capacity suits runs of many bars or long strips without splitting power across extra hardware. For larger venues, use several controllers on the same Art-Net network, each handling its own section. One-piece samples are available, with a 7–15 day lead time and a 2-year warranty; contact us for the datasheet and for help sizing ports and power to your project.
Installation is straightforward: mount the controller in a cabinet or equipment room, wire the four pixel runs to the four ports, connect the Art-Net source, and map the runs in your console or software. The 700 W load is shared across the ports, so plan the run lengths so no single port is overloaded.
Specifications
| Model | AX-ARTNET-4PORT-700W |
| Ports | 4 |
| Max load | 700W |
| Protocols | WS2811, SK6812, UCS1903, SPI, ArtNet, DMX512 |
| Application | Stage, architectural lighting |
| Warranty | 2 years |
MOQ 1 pc sample available · Lead time 7–15 days · 2-year warranty
